Probe sensor is positioned inside of the pipe so its exact coordinates are always known and stay constant. For 2" diameter pipes.
Probe sensor is positioned inside of the pipe so its exact coordinates are always known and stay constant. For 2" diameter pipes.
Features
For all important diameters: the compressed air counter transmitter in four diameter sizes, this transmitter offers a compact design coupled with integrated high-performance technology, which provides all necessary signal outputs. The built-in inflow and outflow pipes allow optimum accuracy. The thermal, glass-coated ceramic sensor offers robustness at the same time as fastest reaction times. Superior design from the sensor to the housing in contrast to the penetration probes used by competitors, the sensor in this transmitter has a position in the pipe which is exactly known and always the same. With penetration probes, a tilt out of the vertical of 5° already leads to a measurement inaccuracy of 5%. In this transmitter, not only are the inflow and outflow pipes integrated, they also have completely even surfaces (i.e. no flange recesses etc.) Many clever details in the design of this transmitter ensure that the flow profile remains constant and that an optimum of accuracy can be achieved.Defined interior diameter and volume flow adjustment for highest accuracy especially in small diameters, the exact knowledge of the interior diameter plays a deciding part in achieving accurate measurements of norm volume flow. Commercially available penetration probes measure the flow velocity and calculate the volume flow by multiplication with the cross-section area. As shown in the illustration, even normed pipes can vary in interior diameter to such a degree that inaccuracies of up to 33% are possible. This transmitter has an exactly known diameter – and is adjusted directly according to norm volume flow, and not flow velocity!
Measurement Parameters | |
(Normal) Volume Flow | Selectable units: m3/h; l/min; m3 Measuring range (1:300)*: 2.3 to 700 m3/h Accuracy (normal volume flow): For compressed air quality classes (ISO 8573: particles-humidity-oil) 1-4-1: ±3% of measurement value ±0.3% of final value For compressed air quality classes (ISO 8573: particles-humidity-oil) 3-4-4: ±6% of measurement value ±0.6% of final value Sensor: Thermal, glass-coated ceramic sensor (calorimetric measurement procedure) Response time: <0.1 seconds (for damping parameter = 0), delayable via operating menu (0 to 1 second) *1) Specifications according to DIN 2533 (15°C, 1013.25 hPa, 0% RH) |
Temperature | Unit: °C Measuring range: 32 to 140°F/0 to 60°C |
Inputs and Outputs | |
Analog Output | Output type: 4 to 20 mA (4-wire) freely scalable between zero and measuring range end Load: maximum 500 Ω |
Further Outputs | Pulse output: Consumption quantity counter (value remains available after reset or power cut due to non-volatile memory), value 1 or 10 m3, pulse length 0.02 to 2 s, 24 V DC level Switch output: 2 switch outputs, parameterizable (consumption or volume flow-dependent, opener, closer, hysteresis, window), loadable with maximum 20 to 30 V DC or 250 mA each, switch status is displayed via 2 LEDs |
Supply | Voltage supply: 19 to 30 V DC Current consumption: <100 mA Connection: M12 x 1 plug, loadable up to 250 mA, short-circuit-proof (synchronized), reverse-polarity-proof, overload-proof |
General Specifications | |
Display | Material: 4-figure alphanumerical display, two operating buttons, operating menu, LED (4 x green for physical units, 3 x yellow for display x 1000 or switch status) Maximum display value normal volume flow: 840 m3/h Temperature display: 32 to 140°F, measurement error ±2 K, (0 to 60°C) |
Operation | Parameterization: 2 operating buttons |
Installation | Measurement stretch: thread (both sides)/material: R2, outer thread stainless steel 1.4401 |
Humidity (Sensor) | Relative humidity <90% RH |
Temperature | Opreating (housing): 32 to 140°F (0 to 60°C) Storage: -13 to 185°F (-25 to 85°C) |
Measurement Medium | Compressed air |
Process Pressure | PN 16 (maximum 16 bar/232psi) |
Air Quality | ISO 8573: recommended classes 1-4-1 |
Material Housing | PBT (GF 20%), diecast zinc, silica-free |
Protection Class | IP 65/III |
EMC | According to guideline 89/336 EEC |
Media Contact | Materials stainless or galvanized steel, PEEK, polyester, Viton, anodized aluminium ceramic |
Long Measurement Stretch | 475 mm |
Pipe Diameter | DN 50 (for 2" pipes) |
Weight | 8.38 lbs (3.8 kg) |
Measurement Parameters | |
(Normal) Volume Flow | Selectable units: m3/h; l/min; m3 Measuring range (1:300)*: 2.3 to 700 m3/h Accuracy (normal volume flow): For compressed air quality classes (ISO 8573: particles-humidity-oil) 1-4-1: ±3% of measurement value ±0.3% of final value For compressed air quality classes (ISO 8573: particles-humidity-oil) 3-4-4: ±6% of measurement value ±0.6% of final value Sensor: Thermal, glass-coated ceramic sensor (calorimetric measurement procedure) Response time: <0.1 seconds (for damping parameter = 0), delayable via operating menu (0 to 1 second) *1) Specifications according to DIN 2533 (15°C, 1013.25 hPa, 0% RH) |
Temperature | Unit: °C Measuring range: 32 to 140°F/0 to 60°C |
Inputs and Outputs | |
Analog Output | Output type: 4 to 20 mA (4-wire) freely scalable between zero and measuring range end Load: maximum 500 Ω |
Further Outputs | Pulse output: Consumption quantity counter (value remains available after reset or power cut due to non-volatile memory), value 1 or 10 m3, pulse length 0.02 to 2 s, 24 V DC level Switch output: 2 switch outputs, parameterizable (consumption or volume flow-dependent, opener, closer, hysteresis, window), loadable with maximum 20 to 30 V DC or 250 mA each, switch status is displayed via 2 LEDs |
Supply | Voltage supply: 19 to 30 V DC Current consumption: <100 mA Connection: M12 x 1 plug, loadable up to 250 mA, short-circuit-proof (synchronized), reverse-polarity-proof, overload-proof |
General Specifications | |
Display | Material: 4-figure alphanumerical display, two operating buttons, operating menu, LED (4 x green for physical units, 3 x yellow for display x 1000 or switch status) Maximum display value normal volume flow: 840 m3/h Temperature display: 32 to 140°F, measurement error ±2 K, (0 to 60°C) |
Operation | Parameterization: 2 operating buttons |
Installation | Measurement stretch: thread (both sides)/material: R2, outer thread stainless steel 1.4401 |
Humidity (Sensor) | Relative humidity <90% RH |
Temperature | Opreating (housing): 32 to 140°F (0 to 60°C) Storage: -13 to 185°F (-25 to 85°C) |
Measurement Medium | Compressed air |
Process Pressure | PN 16 (maximum 16 bar/232psi) |
Air Quality | ISO 8573: recommended classes 1-4-1 |
Material Housing | PBT (GF 20%), diecast zinc, silica-free |
Protection Class | IP 65/III |
EMC | According to guideline 89/336 EEC |
Media Contact | Materials stainless or galvanized steel, PEEK, polyester, Viton, anodized aluminium ceramic |
Long Measurement Stretch | 475 mm |
Pipe Diameter | DN 50 (for 2" pipes) |
Weight | 8.38 lbs (3.8 kg) |