Image is for reference only, refer to product info for complete details.
Dual scale. Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
Dual scale. Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C) |
Pressure Limits | -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
Enclosure Rating | IP67 |
Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
Mounting Orientation | Diaphragm in vertical position |
Process Connections | ⅛" emale NPT duplicate high and low pressure taps - one pair side and one pair back |
Dimensions | 4" (101.6 mm) diameter dial face |
Click on a category to view a selection of compatible accessories with the Dwyer 2002D Magnehelic Differential Pressure Gauge (0-2.0"w.c. & 0-500 Pa).
Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C) |
Pressure Limits | -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
Enclosure Rating | IP67 |
Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
Mounting Orientation | Diaphragm in vertical position |
Process Connections | ⅛" emale NPT duplicate high and low pressure taps - one pair side and one pair back |
Dimensions | 4" (101.6 mm) diameter dial face |
Click on a category to view a selection of compatible accessories with the Dwyer 2002D Magnehelic Differential Pressure Gauge (0-2.0"w.c. & 0-500 Pa).