RIDGID ST-510 SeekTech Transmitter, 10 Watts

Model: ST-510 | Order No: 21903 | UPC: 095691219039

Be the first to review this product

RIDGID ST-510 SeekTech Transmitter, 10 Watts-

Downloads: datasheet

More RIDGID Products

Ask an Expert

RIDGID ST-510 SeekTech Transmitter, 10 Watts

Model: ST-510 | Order No: 21903 | UPC: 095691219039

Be the first to review this product

Has fully variable power output to maximize battery life or push the signal further down the run for better utility locating and large-diameter pipe location.

Sale Price	$2281.89 USD
Regular Price	$2593.05 USD
Availability	2 to 3 Weeks
Quantity

Recommended Accessories

RIDGID 72963 SeekTech Inductive Signal Clamp, 4.7" (119mm)

72963

RIDGID ST-510 Offers

Features

LCD display provides instant visual feedback about line resistance, impedance, and current flow keeping circuit information easy to read while underground wire locating
Extended range 25-foot (7,62 meter) terminal leads can attach using the heavy duty clips or built-in magnets and have built-in edge to scrape paint for optimal connection to pipe, ground or connection point
Generates frequencies: Direct Connect - 128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz; Induction - 1 kHz, 8 kHz, 33 kHz, 262 kHz* - Competitor frequencies available in both direct connect and induction

RIDGID ST-510 Specifications

Power Source	8 Alkaline or rechargeable batteries
Weight	Without batteries: 4.75 lbs (2.15 kg) With batteries: 7.5 lbs (3.4 kg)
Dimensions	Length: 7.0" (17.8 cm) Width: 15" (38.1 cm) Height: 6.5" (16.5 cm) Cable Length: 48' Extended (14m); 46" contracted (1.1m)
Output Power	Nominal 10 watts max. 1 watt maximum if frequency is above 45kHz. Maximum output voltage 30V RMS; ~ 48V peak
Power Settings	4 mA, 15 mA, 50 mA, 150 mA, 600 mA
Default Settings	60 Hz Mode, 2 Hr. Shutoff, 30V-RMS Maximum, SeekTech frequencies loaded
FCC Limits	.47 CFR 15.213 says that from 9kHz up to (but not including) 45kHz, peak output power shall not exceed 10 W. From 45kHz to 490kHz, it must not exceed 1W.

Click here for complete specifications on the RIDGID ST-510

What's included with the RIDGID ST-510

SeekTech Transmitter
Direct Connect Leads and Clips
Operator's Manual
8 x D-Cell Batteries (Alkaline)
Grounding Stake

datasheet for the RIDGID ST-510 SeekTech Transmitter, 10 Watts

Click on a category to view a selection of compatible accessories with the RIDGID ST-510 SeekTech Transmitter, 10 Watts.

Clamp

RIDGID 72963 SeekTech Inductive Signal Clamp, 4.7" (119mm) 72963

Allows users to apply a signal to a cable or pipe when direct connection is not possible, and is compatible with all RIDGID transmitters. Integrated adapter allows users to attach a hot stick for out of reach lines.

Ask a question about RIDGID ST-510 SeekTech Transmitter, 10 Watts

Customer Reviews for the RIDGID ST-510

Description ➕➖

RIDGID ST-510 Offers

Features

LCD display provides instant visual feedback about line resistance, impedance, and current flow keeping circuit information easy to read while underground wire locating
Extended range 25-foot (7,62 meter) terminal leads can attach using the heavy duty clips or built-in magnets and have built-in edge to scrape paint for optimal connection to pipe, ground or connection point
Generates frequencies: Direct Connect - 128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz; Induction - 1 kHz, 8 kHz, 33 kHz, 262 kHz* - Competitor frequencies available in both direct connect and induction

Specifications ➕➖

RIDGID ST-510 Specifications

Power Source	8 Alkaline or rechargeable batteries
Weight	Without batteries: 4.75 lbs (2.15 kg) With batteries: 7.5 lbs (3.4 kg)
Dimensions	Length: 7.0" (17.8 cm) Width: 15" (38.1 cm) Height: 6.5" (16.5 cm) Cable Length: 48' Extended (14m); 46" contracted (1.1m)
Output Power	Nominal 10 watts max. 1 watt maximum if frequency is above 45kHz. Maximum output voltage 30V RMS; ~ 48V peak
Power Settings	4 mA, 15 mA, 50 mA, 150 mA, 600 mA
Default Settings	60 Hz Mode, 2 Hr. Shutoff, 30V-RMS Maximum, SeekTech frequencies loaded
FCC Limits	.47 CFR 15.213 says that from 9kHz up to (but not including) 45kHz, peak output power shall not exceed 10 W. From 45kHz to 490kHz, it must not exceed 1W.