Klein Tools 1684-74 Offers

Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from 0.12-Inch to 1.0-Inch (3.10 to 25.4 mm). When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip. Double "V" contour reduces the possibility of slippage and damage to the cable.

Features

• When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip
• To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double "V" contour
• For use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand
• Locking handle keeps jaw open while grip is placed on cable with a hot stick
• Made in USA
• Important Notes: Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Grips are to be used for temporary installation, not for permanent anchorage